WELCOME TO DEVRACE CLEVERFILTER 2.1

CleverFilter 2.1 installation notes and issues for Delphi 6-7, Delphi 2005, Delphi 2006, Delphi 2007 and C++ Builder 6.

INSTALLING CleverFilter 2.1

The first step in using CleverFilter is to install it in Delphi or C++Builder. However, before using CleverFilter be sure to read over the License Agreement.

CleverFilter 2.1 may be used in Delphi 6.0-7.0, Delphi 2005-2007 and C++Builder 6.0.

1. Downloading CleverFilter 2.1

2. Remove the previous CleverFilter versions.

3. Delphi 2005 installation / upgrade.

4. Delphi 7.0 installation / upgrade.

5. Delphi 6.0 installation / upgrade.

6. C++Builder 6.0 installation / upgrade.

7. Delphi 2006 installation / upgrade.

8. Delphi 2006 installation / upgrade.

 

1. Downloading CleverFilter 2.1Remove

Full sources of CleverFilter 2.1 are available in online Devrace Customer’s Center:

http://www.devrace.com/cgi-bin/user/user.pl

After processing the CleverFilter order our system sends the login and password to every customer.. In order to get a full version the customer should visit the link and register the login and password. There will be a list of full CleverFilter versions there.

To install CleverFilter 2.1 it’s necessary to download Basic CleverFilter sources (cleverfilter_2_1.zip), and also files cfFilter.pas, cfStorage.pas, cfFilterItemStd.pas, cfFilterItemDB.pas and cfSplash.pas (only for Delphi 2005 upwards)

Important: Before installing CleverFilter 2.1, please, assure that you removed all previous CleverFilter versions (or CleverFilter 2.1 Trial) from your system:

 

1. Remove the previous CleverFilter version.

1. If you used cleverfilter_serup_trial.exe from the previous CleverFilter version, go to Control Panel -> Add or Remove Programs and uninstall CleverFilter.

2. Remove the directory, in which the previous CleverFilter version was installed.

3. Delete the path to the old CleverFilter version in your Delphi (C++ Builder) Environment options. Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and remove the full path of your old CleverFilter Sources directory from the Library Path.

4. If you are not sure, you can search for any previous CleverFilter versions on your computer. For example, try to find cf.inc file on your hard drive. If you have found it, please, remove this CleverFilter version as it can cause further installation problems

2. Delphi 2005 installation / upgrade.

1) Unzip cleverfilter_2_1.zip to your CleverFilter Sources directory (for example, “c:\Documents and Settings\User\My Documents\Borland Studio Projects\CleverFilter\”).

2) Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and add the full path of your CleverFilter Sources directory to the Library Path if you have not already done so. The Library Path field should then look similar to this:

$(BDS)\Lib; c:\Documents and Settings\User\My Documents\Borland Studio Projects\CleverFilter\sources;

Click OK.

3) Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the cfFilter_rt_d2005.bdsproj package source file in your CleverFilter Sources directory, and click "Open".

4) A package editor window will appear. Click "Compile".

5) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

6) Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the cfFilter_d2005.bdsproj package source file in your CleverFilter Sources directory, and click "Open".

7) A package editor window will appear. Click "Compile", then click "Install".

8) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

9) Choose an CleverFilter adapter for your preferable database connectivity. Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the corresponding package source file, and click "Open".

Database Connectivity

Package

ADO

sources\adapters\ADO\cfADOAdapter_d2005.bdsproj

BDE

Sources\adapters\BDE\cfBDEAdapter_d2005.bdsproj

DBExpress

Sources\adapters\DBX\cfDBXAdapter_d2005.bdsproj

FIBPlus

Sources\adapters\FIBPlus\cfFIBPlusAdapter_d2005.bdsproj

IBExpress

Sources\adapters\IBX\cfIBXAdapter_d2005.bdsproj

ODAC

Sources\adapters\ODAC\cfODACAdapter_d2005.bdsproj

NexusDB

Sources\adapters\Nexus\cfNexusAdapter_d2005.bdsproj

10) A package editor window will appear. Click "Compile", then click "Install".

11) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

12) Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and add the full path of selected CleverFilter adapter directory to the Library Path if you have not already done so.

3. Delphi 7.0 installation / upgrade.

1) Unzip cleverfilter_2_1.zip to your CleverFilter Sources directory (for example, “c:\ CleverFilter\”).

2) Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and add the full path of your CleverFilter Sources directory to the Library Path if you have not already done so. The Library Path field should then look similar to this:

$(DELPHI)\Lib; c:\cleverfilter\sources;

Click OK.

3) Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the cfFilter_rt_d7.dpk package source file in your CleverFilter Sources directory, and click "Open".

4) A package editor window will appear. Click "Compile".

5) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

6) Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the cfFilter_d7.dpk package source file in your CleverFilter Sources directory, and click "Open".

7) A package editor window will appear. Click "Compile", then click "Install".

8) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

9) Choose an CleverFilter adapter for your preferable database connectivity. Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the corresponding package source file, and click "Open".

Database Connectivity

Package

ADO

sources\adapters\ADO\cfADOAdapter_d7.dpk

BDE

Sources\adapters\BDE\cfBDEAdapter_d7.dpk

DBExpress

Sources\adapters\DBX\cfDBXAdapter_d7.dpk

FIBPlus

Sources\adapters\FIBPlus\cfFIBPlusAdapter_d7.dpk

IBExpress

Sources\adapters\IBX\cfIBXAdapter_d7.dpk

ODAC

Sources\adapters\ODAC\cfODACAdapter_d7.dpk

NexusDB

Sources\adapters\Nexus\cfNexusAdapter_d7.bdsproj

10) A package editor window will appear. Click "Compile", then click "Install".

11) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

12) Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and add the full path of selected CleverFilter adapter directory to the Library Path if you have not already done so.

4. Delphi 6.0 installation / upgrade.

1) Unzip cleverfilter_2_1.zip to your CleverFilter Sources directory (for example, “c:\ CleverFilter\”).

2) Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and add the full path of your CleverFilter Sources directory to the Library Path if you have not already done so. The Library Path field should then look similar to this:

$(DELPHI)\Lib; c:\cleverfilter\sources;

Click OK.

3) Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the cfFilter_rt_d6.dpk package source file in your CleverFilter Sources directory, and click "Open".

4) A package editor window will appear. Click "Compile".

5) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

6) Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the cfFilter_d6.dpk package source file in your CleverFilter Sources directory, and click "Open".

7) A package editor window will appear. Click "Compile", then click "Install".

8) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

9) Choose an CleverFilter adapter for your preferable database connectivity. Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the corresponding package source file, and click "Open".

Database Connectivity

Package

ADO

sources\adapters\ADO\cfADOAdapter_d6.dpk

BDE

Sources\adapters\BDE\cfBDEAdapter_d6.dpk

DBExpress

Sources\adapters\DBX\cfDBXAdapter_d6.dpk

FIBPlus

Sources\adapters\FIBPlus\cfFIBPlusAdapter_d6.dpk

IBExpress

Sources\adapters\IBX\cfIBXAdapter_d6.dpk

ODAC

Sources\adapters\ODAC\cfODACAdapter_d6.dpk

NexusDB

Sources\adapters\Nexus\cfNexusAdapter_d6.bdsproj

10) A package editor window will appear. Click "Compile", then click "Install".

11) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

12) Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and add the full path of selected CleverFilter adapter directory to the Library Path if you have not already done so.

5. C++Builder 6.0 installation / upgrade.

1) Unzip cleverfilter_2_1.zip to your CleverFilter Sources directory (for example, “c:\ CleverFilter\”).

2) Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and add the full path of your CleverFilter Sources directory to the Library Path if you have not already done so. The Library Path field should then look similar to this:

$(BCB)\Lib;$(BCB)\Lib\Obj;c:\cleverfilter\sources;

Click OK.

3) Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the cfFilter_rt_bcb6.bpk package source file in your CleverFilter Sources directory, and click "Open".

4) A package editor window will appear. Click "Compile".

5) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

6) Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the cfFilter_bcb6.bpk package source file in your CleverFilter Sources directory, and click "Open".

7) A package editor window will appear. Click "Compile", then click "Install".

8) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

9) Choose an CleverFilter adapter for your preferable database connectivity. Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the corresponding package source file, and click "Open".

Database Connectivity

Package

ADO

sources\adapters\ADO\cfADOAdapter_bcb6.bpk

BDE

Sources\adapters\BDE\cfBDEAdapter_bcb6.bpk

DBExpress

Sources\adapters\DBX\cfDBXAdapter_bcb6.bpk

FIBPlus

Sources\adapters\FIBPlus\cfFIBPlusAdapter_bcb6.bpk

IBExpress

Sources\adapters\IBX\cfIBXAdapter_bcb6.bpk

ODAC

Sources\adapters\ODAC\cfODACAdapter_bcb6.bpk

10) A package editor window will appear. Click "Compile", then click "Install".

11) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

12) Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and add the full path of selected CleverFilter adapter directory to the Library Path if you have not already done so.

6. Delphi 2006 installation / upgrade.

1) Unzip cleverfilter_2_1.zip to your CleverFilter Sources directory (for example, “c:\Documents and Settings\User\My Documents\Borland Studio Projects\CleverFilter\”).

2) Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and add the full path of your CleverFilter Sources directory to the Library Path if you have not already done so. The Library Path field should then look similar to this:

$(BDS)\Lib; c:\Documents and Settings\User\My Documents\Borland Studio Projects\CleverFilter\sources;

Click OK.

3) Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the cfFilter_rt_d2005.bdsproj package source file in your CleverFilter Sources directory, and click "Open".

4) A package editor window will appear. Click "Compile".

5) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

6) Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the cfFilter_d2005.bdsproj package source file in your CleverFilter Sources directory, and click "Open".

7) A package editor window will appear. Click "Compile", then click "Install".

8) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

9) Choose an CleverFilter adapter for your preferable database connectivity. Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the corresponding package source file, and click "Open".

Database Connectivity

Package

ADO

sources\adapters\ADO\cfADOAdapter_2006.bdsproj

BDE

Sources\adapters\BDE\cfBDEAdapter_2006.bdsproj

DBExpress

Sources\adapters\DBX\cfDBXAdapter_2006.bdsproj

FIBPlus

Sources\adapters\FIBPlus\cfFIBPlusAdapter_2006.bdsproj

IBExpress

Sources\adapters\IBX\cfIBXAdapter_2006.bdsproj

ODAC

Sources\adapters\ODAC\cfODACAdapter_2006.bdsproj

NexusDB

Sources\adapters\Nexus\cfNexusAdapter_2006.bdsproj

10) A package editor window will appear. Click "Compile", then click "Install".

11) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

12) Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and add the full path of selected CleverFilter adapter directory to the Library Path if you have not already done so.

 

7. Delphi 2007 installation / upgrade.

1) Unzip cleverfilter_2_1.zip to your CleverFilter Sources directory (for example, “c:\Documents and Settings\User\My Documents\Borland Studio Projects\CleverFilter\”).

2) Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and add the full path of your CleverFilter Sources directory to the Library Path if you have not already done so. The Library Path field should then look similar to this:

$(BDS)\Lib; c:\Documents and Settings\User\My Documents\Borland Studio Projects\CleverFilter\sources;

Click OK.

3) Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the cfFilter_rt_d2005.bdsproj package source file in your CleverFilter Sources directory, and click "Open".

4) A package editor window will appear. Click "Compile".

5) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

6) Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the cfFilter_d2005.bdsproj package source file in your CleverFilter Sources directory, and click "Open".

7) A package editor window will appear. Click "Compile", then click "Install".

8) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

9) Choose an CleverFilter adapter for your preferable database connectivity. Select "File" | "Open..." on the menu bar. Set "Type of files" to Delphi package source, locate and select the corresponding package source file, and click "Open".

Database Connectivity

Package

ADO

sources\adapters\ADO\cfADOAdapter_2007.bdsproj

BDE

Sources\adapters\BDE\cfBDEAdapter_2007.bdsproj

DBExpress

Sources\adapters\DBX\cfDBXAdapter_2007.bdsproj

IBExpress

Sources\adapters\IBX\cfIBXAdapter_2007.bdsproj

ODAC

Sources\adapters\ODAC\cfODACAdapter_2007.bdsproj

NexusDB

Sources\adapters\Nexus\cfNexusAdapter_2007.bdsproj

10) A package editor window will appear. Click "Compile", then click "Install".

11) Close the package editor window. If you are asked if you want to save changes to the package, answer "No".

12) Select "Tools" | "Environment Options..." on the menu bar. Go to "Library" tab and add the full path of selected CleverFilter adapter directory to the Library Path if you have not already done so.

_______________________________

Copyright (c) 2007 Devrace Company

All rights reserved.


Preview text: 

CleverFilter 2.1 installation notes and issues for Delphi 6-7, Delphi 2005, Delphi 2006, Delphi 2007 and C++ Builder 6.


Prices in Euro:

83 (1 copy)

Navigation


FOR CUSTOMERS
Download full versions and updates in our Customer's Center